+- Forums Steel Investment Casting (http://www.steelinvestmentcasting.com/forum)
+-- Forum: My Category (http://www.steelinvestmentcasting.com/forum/forum-1.html)
+--- Forum: My Forum (http://www.steelinvestmentcasting.com/forum/forum-2.html)
+--- Thread: Welding Stainless Steel to Mild Steel Feasibility in Foundry Applications? (/thread-240.html)
Pages:
1
2
Welding Stainless Steel to Mild Steel Feasibility in Foundry Applications? - BuzzingBrigade - 05-11-2024
hey folks, I'm contemplating a project that involves welding stainless steel to mild steel in a foundry setting. Does anybody get experience with this? Is it even doable?
RE Welding Stainless Steel to Mild Steel Feasibility in Foundry Applications? - Crystal - 05-11-2024
i've done any welding projects, however haven't attempted this combination specifically. I'm interested to know too, because it appears like it could be tricky.
RE Welding Stainless Steel to Mild Steel Feasibility in Foundry Applications? - Fern - 05-11-2024
i've attempted it before. It's definitely possible, but there are any considerations. The distinction in composition and properties in between stainless steel and mild steel can pose challenges.
RE Welding Stainless Steel to Mild Steel Feasibility in Foundry Applications? - WanderWordies - 05-11-2024
what kind of challenges did you confront,? And did you control to overcome them successfully?
RE Welding Stainless Steel to Mild Steel Feasibility in Foundry Applications? - Maryam - 05-11-2024
the main challenge is the difference in thermal expansion coefficients between the two metals. This can leadéto cracking and distortion during welding. On top, achieving a sturdy bond among stainless and mild steel can be difficult due to their diverse compositions. I did handle to overcome those challenges with canny selection of welding techniques and filler materials.
RE Welding Stainless Steel to Mild Steel Feasibility in Foundry Applications? - Alexandre - 05-11-2024
i've heard on using nickel-based filler materials for welding stainless to mild steel. Is that a common practice,?
RE Welding Stainless Steel to Mild Steel Feasibility in Foundry Applications? - LinaB - 05-11-2024
yes, using nickel-based filler materials can help span the rift in between stainless and mild steel. They furnish good strength and ductility, which is crucial for creating a sound weld joint. However, proper surface preparation and welding techniques are equally important.
RE Welding Stainless Steel to Mild Steel Feasibility in Foundry Applications? - Caiden - 05-11-2024
what about the post-weld treatment? Are there any specific procedures 1 should follow to guarantee the integrity of the weld?
RE Welding Stainless Steel to Mild Steel Feasibility in Foundry Applications? - Israel - 05-11-2024
post-weld treatment method is crucial for ensuring the integrity of the weld joint. Calefaction treatment or stress relieving can help reduce residual stresses and increase the automated properties of the weld. Also, thorough cleansing and passivation of the weld area are crucial to prevent corrosion, particularly in stainless steel.
RE Welding Stainless Steel to Mild Steel Feasibility in Foundry Applications? - RumbleRangers - 05-11-2024
thanks for sharing your insights! It sounds like welding stainless steel to mild steel requires careful planning and execution. I'll keep all these considerations in mind for my project.