Forums Steel Investment Casting

Hey everyone! I've been reading up on Diy foundries and stumbled upon the idea of employing a 24 qt stainless steel pot as the basis. Has anybody here attempted this process before? How powerful is it?

Fascinating choice! I've seen people using all sorts of materials for homemade foundries, however I haven't personally tried a stainless steel pot. How do you plan to set it up?

Nicely, from what I've gathered, the stainless steel pot serves as the crucible for melting metal, and it can withstand high temperatures. I'm thinking of lining it with refractory material to insulate it and then utilizing a propane burner underneath for calefaction.

That sounds like a solid plan! Do you have any concerns about the pot's longevity under such high temperatures? Stainless steel is fairly sturdy, but I wonder if it could warp or degrade over period.

That's an excellent point. I've seen some mixed opinions on this problem. Any people claim that stainless steel pots hold up nicely, while others get reported warping or even cracking soon after extended exploit. I suppose it depends on factors like the quality of the pot and how it's employed.

I've been using a similar setup with a stainless steel pot for a while now, and it's been holding up well for me. Ofcourse, I take care to preheat it gradually and avoid rapid temperature adjustments to minimize stress on the metal.

That's comforting to hear! How on the efficiency of the foundry? Does utilizing a stainless steel pot affect the melting procedure or the overall performance compared to other materials like ceramic or graphite crucibles?

From what I've gathered, stainless steel pots can work just aswellas more materials, if not better in some cases. They conduct temperature efficiently and can handle a variety of metals. plus, they're relatively simple to find and affordable compared to specialized crucibles.

That's good to know! I'm intrigued by the concept of building my possess foundry, and using a stainless steel pot would seem like a practical choice. Do you get any guidelines or assets you can share for somebody who's only starting up out?

Absolutely! There are many tutorials and forums on-line where people share their experiences and tips for building foundries. I'd advise doing any study to find a process that suits your needs and cost. And don't be reluctant to inquire for help if you run into any challenges along the way!